Painting and drying booth Well Kraft LPB-9200

Description

Camera Base

Gender:

• Galvanized steel structure;
• Height - 300 mm;
• Lattice in two rows;
• Grates made of flat painted beams, size 30x4 mm and twisted steel 10 mm;
• Maximum floor load 600 kg per wheel;
• Frame for filter installation;
• Two driving ramps mounted on the outside of the chamber, 520x2,000 mm in size (Width x Length).
  

• Fiberglass;
• Filtration level - G3 (EN779);
• Type PA-50;
• Filtration area - 10.35 sq.m.
  

---

Camera

• Length - 6900 mm;
• Width - 3900 mm;
• Height - 2,650 mm.
  

• Length - 7,000 mm;
• Width - 5350 mm;
• Height - 3400 mm.
  

• Three-wing gates;
• Gate width - 3,000 mm;
• Gate height - 2600 mm;
• Large viewing windows - 3 pcs.
  

• Door width - 700 mm;
• Door height - 2,000 mm.
  

• Panel thickness - 50 mm;
• Panel width - 1000 mm;
• Insulation - EPS;
• Outside and inside covered with painted steel sheets, 0.326 mm thick;
• Pile structure fixation and double-sided protection.
  

• Right and left 5 lighting blocks each (10 blocks in total);
• Each unit is equipped with 4 PHILLIPS fluorescent lamps of 36W each.
  

Side lighting:

• Right and left 5 lighting blocks each (10 blocks in total);
• Each unit is equipped with 2 PHILLIPS fluorescent lamps of 36W each.

• Height of block - 450 mm;
• All components are made of bent galvanized steel, white powder coated for extended life;
• With a framed ceiling filter placed inside;
• Filtration level is F5 (EN779), type SP-600G.
  

---

Air injection unit

• Block length - 1,700 mm;
• Block width - 1250 mm;
• Height - 2200 mm;
• Construction in galvanized steel, 1.5 mm thick, framed in an aluminum angle.
  

• Centrifugal fan with motor inside;
• Number of fans - 2 pcs;
• Number of motors - 2 pcs, power of one motor - 3 kW;
• Total power - 6 kW;
• Total capacity - 21,000 m3/h.
  

СControl system:

• Control device Belimo NMU230 10N, to control the amount of fresh air.

• Controls the opening/closing of the air valve during the dyeing or drying phase.
  

• Power - 200 kW;
• Made of 1.5mm stainless steel 1Gr18N i9Ti(SUS304), with stainless steel multi-cycle round radiator pipes;
• Equipped with explosion prevention devices.
  

• Diesel burner - Riello G20;
• Heat transfer - 200,000 kcal/h;
• Minimum diesel consumption 8 l;
• Maximum consumption - 12 l;
• Minimum heat output - 340,000 kJ;
• Maximum - 750,000 kJ.
  

• Inlet coarse filter kit;
• Cleaning level - G3 (EN779), type - C16-300;
• Fiberglass filter kit;
• Degree of cleaning - G3 (EN779), type - PA-50.

Air extraction unit

• Motor - inside the fan;
• Number of fans - 1 pc;
• Motor power: 4 kW;
• Type - double centrifugal fan for air intake;
• Total capacity - 12,500 m3/h

Control system:

• Control device for controlling the amount of air;
• The exhaust system consists of a straight 4m exhaust duct, 1 pipe with a 90° elbow and one pipe with a 30° elbow.

Exhaust filters:

• Fiberglass filter;
• Cleaning level -G3 (EN779);
• Type - PA-50;
• M-shaped charcoal filter in a frame, inside a ventilation pipe.

---

Control system

• Temperature controller;
• Timer;
• Dry timer;
• Manometer;
• Power indicator;
• Staining progress indicator;
• Drying stage indicator;
• Alarm indicator;
• Staining step switch;
• Drying step switch;
• Right lighting switch;
• Switch of the left lighting unit;
• Emergency switch;
• Launch button.

Completed PSK projects

PSK Yoki Star - Volodarka