Painting and drying booth Well Kraft LPB-9200

Drying Booth Base

Design:

• Galvanized steel construction;
• Height – 300 mm;
• Two-row grating;
• Gratings made of flat painted beams 30×4 mm and twisted steel 10 mm;
• Maximum floor load – 600 kg per wheel;
• Frame for filter installation;
• Two external drive-on ramps, size 520×2000 mm (Width × Length).

Lower filter:

• Fiberglass;
• Filtration class – G3 (EN779);
• Type PA-50;
• Filtration area – 10.35 m².

Booth

Internal dimensions:

• Length – 6900 mm;
• Width – 3900 mm;
• Height – 2650 mm.

External dimensions:

• Length – 7000 mm;
• Width – 5350 mm;
• Height – 3400 mm.

Drive-in gates:

• Three-leaf gates;
• Gate width – 3000 mm;
• Gate height – 2600 mm;
• Large viewing windows – 3 pcs.

Personnel door:

• Door width – 700 mm;
• Door height – 2000 mm.

Wall panels:

• Panel thickness – 50 mm;
• Panel width – 1000 mm;
• Insulation – EPS;
• Painted steel sheets on both inner and outer sides, thickness 0.326 mm;
• Column frame fixation and double-sided protection.

Ceiling lighting:

• 5 lighting blocks on each side (total 10 blocks);
• Each block equipped with 4 PHILIPS fluorescent lamps, 36 W each.

Side lighting:

• 5 lighting blocks on each side (total 10 blocks);
• Each block equipped with 2 PHILIPS fluorescent lamps, 36 W each.

Air intake ventilation unit:

• Unit height – 450 mm;
• All components made of bent galvanized steel with white powder coating for extended service life;
• With internal framed ceiling filter;
• Filtration class – F5 (EN779), type SP-600G.

Air Supply Unit

Unit dimensions:

• Length – 1700 mm;
• Width – 1250 mm;
• Height – 2200 mm;
• Galvanized steel construction, 1.5 mm thick, framed with aluminum angle.

Supply air fan:

• Centrifugal fan with internal motor;
• Number of fans – 2 pcs;
• Number of motors – 2 pcs, motor power – 3 kW each;
• Total power – 6 kW;
• Total capacity – 21,000 m³/h.

Control system:

• Belimo NMU230 10N control device for fresh air volume regulation.

Pneumatic control device:

• Controls opening/closing of the air damper during painting or drying phases.

Heat generator:

• Power – 200 kW;
• Made of 1.5 mm stainless steel 1Gr18N i9Ti (SUS304), with multi-cycle round stainless steel heat exchanger tubes;
• Equipped with explosion prevention devices.

Burner:

• Diesel burner – Riello G20;
• Heat output – 200,000 kcal/h;
• Minimum diesel consumption – 8 l;
• Maximum consumption – 12 l;
• Minimum thermal power – 340,000 kJ;
• Maximum – 750,000 kJ.

Filters:

• Set of coarse inlet filters;
• Filtration class – G3 (EN779), type C16-300;
• Set of fiberglass filters;
• Filtration class – G3 (EN779), type PA-50.

Exhaust Air Unit

Frame dimensions:

• Length – 1500 mm;
• Width – 1250 mm;
• Height – 1150 mm.

Motor and fan:

• Motor located inside the fan;
• Number of fans – 1 pc;
• Motor power – 4 kW;
• Type – double centrifugal exhaust fan;
• Total capacity – 12,500 m³/h.

Control system:

• Airflow control device;
• Exhaust system consists of a straight exhaust duct 4 m long, one pipe with a 90° elbow and one pipe with a 30° elbow.

Exhaust filters:

• Fiberglass filter;
• Filtration class – G3 (EN779);
• Type – PA-50;
• M-shaped carbon filter in a frame, inside the ventilation duct.

Paint Booth Control System

• Temperature controller;
• Timer;
• Drying timer;
• Pressure gauge;
• Power indicator;
• Painting progress indicator;
• Drying phase indicator;
• Alarm indicator;
• Painting stage switch;
• Drying stage switch;
• Right lighting switch;
• Left lighting block switch;
• Emergency stop switch;
• Start button.