Installation for vacuum selection and discharge of oil 65l with lowered oil receiver Meclube 041-1450-000
Our qualified specialists will definitely help you.
Description
65 L Meclube 041-1450-000 Vacuum Oil Extraction and Drain Unit with Lowering Oil Receiver
The Meclube 041-1450-000 pneumatic oil extraction unit is a comprehensive solution for efficient vehicle maintenance. It's equipped with a pantograph and a 14-liter tray, allowing you to adjust the height of the receiving container to suit your needs. Once a vacuum is created in the main tank, the equipment can operate in autonomous mode, without requiring a constant connection to a compressor. The unit is suitable for working with any type of vehicle.
The 65-liter tank with a level indicator is equipped with wheels and a handle for convenient transport of the unit around the workspace. The kit includes 10 probes for various operations.
Used oil is extracted at a temperature of 60–80°C (when the engine has just been switched off). The process can be carried out either by gravity draining into the tray (14 L), which can be placed on the floor or raised to the level of a lift, or by vacuum suction using the appropriate probe from the kit. The unit can suck up to 2/3 of its capacity, which is 43-45 liters. For convenience, a three-section tool tray is provided.
Components:
- Tank with a capacity of 65 L and a level indicator.
- Tool tray made of ABS plastic with 3 sections.
- Receiving reservoir with a capacity of 14 L on pantographic brackets with a protective grid for draining replaced oil filters.
- Pneumatic tank emptying (maximum pressure 0.5 bar).
- Set of 10 standard probes.
Technical Data:
- Gross weight: 42.6 kg
- Net weight: 37.3 kg
- Air pressure for depressurization: 7.5 – 8 bar
- Depressurization time: 2’ - 2.5’ L/min
- Maximum suction capacity with one depressurization: 43 - 45 L
- Suction time with Ø 6 mm probe and oil at 60 – 80 °C: 1.5 - 2 L/min
- Length of suction/drain hose: 2 m
Important Warning: This unit must not be used for suctioning brake fluids, fuels, or flammable and corrosive liquids. Please strictly follow these recommendations for safe and effective operation.
Specifications
|
vendor code
|
011451 |
|
Working pressure, bar
|
7.5-8 |
|
Container volume, l
|
65 |
|
Pumping speed, l/min
|
1.5-2 |
|
Vacuum creation time, l/min
|
2-2.5 |
|
Total height of the product, mm
|
1500 |
|
The total width of the product, mm
|
530 |
|
Total length of the product, mm
|
640 |
|
Weight, kg
|
42 |


